X-Yachts Xc 50

X-Yachts Xc 50 for sale. This Cruiser-Racer is built in 2011 and was designed by Niels Jeppesen.

Basic Details

  • Make:
  • Model:
    Xc 50
  • Type:
    Sail Boat - Cruiser-Racer
  • Builder:
  • Year:
  • Condition:
  • Location:
    Antwerpen, Belgium
  • Price:
    525,000 EUR


Long distance cruiser yacht ready to go around the world, praised for her combination of cruising comfort, performance under sail and responsive handling in all weathers. One owner.

Very well maintained, no damage has occurred to the yacht. Lot's of special extras, unique Mastervolt electrical installation.

Great interior volume, powerful main engine in a well-insulated compartment, with a 3-bladed folding propeller; large fuel and fresh water tanks, all strategically located low and central in the yacht for optimum weight distribution; an immensely strong steel hull girder frame, taking the loads from the composite lead/cast iron keel as well as from the keel stepped mast, and the discontinued rod rig.

Number of cabins: 3
Number of heads: 2

Price (excl. options): 575.000€, VAT included (original invoice available for proof of VAT payment).

The boat can be sold ex VAT also, please contact us for details.

Full description of the yacht + options, many pictures on demand.


Length: 14,99 m
Width: 4,56 m
Depth: 2,35 m
Keel weight: 6.065 kg
Displacement: 17.500 kg

Diesel tanks: 3x stainless steel – 600 l. total
Water tanks: 3x stainless steel – 800 l. total
Waste tanks: 2x stainless steel – 60 l. each


Builder: Yanmar

Type: 4HJ-HTE – 4 cyl. Turbo – 110 BHP
Propeller: Gory 24x15x3
Fire: Automatic fire istinguisher
Filters: Additional fuel / waterseperation & water intake
Battery (eng. / gen.): 1x DC-12V / 80Ah
Alternator: DC-24V / 60A
Caharger: AC-220V -> DC-12V / 25A
Solar Panel: DC-12V / 24Wp


Hull: White (RAL 9010)
Waterlines: Grey (RAL 7011)
Bottom treatment: 3 layers epoxy, 3 layers antifouling
Bow thruster: DC-24V, Max Power, retractable & switch at helm
Central hoist sling:  Polyester strap and galvanized shackle


Teak coach rooftop
Bow - A-frame: Stainless steel with teak planks & tack eye
Bow boarding ladder: Stainless steel, retractable
Bow anchor: DC-24V, 25 kg & 75m chain 10mm & switch at helm
Rear anchor: DC-24V, 15 kg & 75m lead rope & switch at helm
Bracket: Teak, for out boarder
Davits: Stainless steel, for dinghy
Floodlight: DC-12V 60W & switch at helm
Deck wash: DC-24V salt water pump & hose in anchor locker
Mooring equip.: All necessary fenders & mooring lines included


Mast steps: 6 x foldable
Mast track: Harken
Outhaul track: Harken
Reefs: 3 single line reefs
Spinnaker equip.: Spi-boom, 2 x halyards, tacking line & blocs
Furler: Reckmann instead of standard Furlex
Genoa cars: 2 x additional for inner forestay sheets
Pad eye genoa: Double instead of single
Inner forestay: Kevlar, retractable
Tricolour: DC-12V LED & strobo & windex


Mainsail: Full batten spectra UV / 3 reefs, lazy bag
Jib 120%: Furling -spectra UV / rope luff / 2 reefs
Staysail: Furling - spectra UV, harken roller system
Storm jib: Dacron
Spinnaker: A 0,75-0,90 nylon gradient supercote, Snuffer
Bags: All sails come with original sail bags
Sheets / blocs: All necessary included


Winches Andersen:
2x 68STE-FS (2x DC-24V) – Genoa,
2x 52STE-FS (2x manual) – Main
2x 46STE-FS (1x DC-24V, 1x manual) – Piano

Acoustic signals: DC-24V bilge pump & low fuel consumption tank
Windscreen: Aluminium frame with fixed glass
Sprayhood: Stainless steel tubing, grey canvas
Bimini: Stainless steel tubing, grey canvas
Table: Large retractable table with coolbox
Cushions: Grey canvas with rail
Speakers: Bose waterproof
Shower: Warm & cold water tap with hose
Lights: DC-12V LED at table and floor & switches at helm
Remote: 2x for transom door
Bags: 2x ropes & 4x winch handles
Covers: Cockpit table, steering wheels, winches, …


Bulkheads & lockers in teak instead of white
Chair instead of pouf
Cushions leather 71017
Sea-berth cloth
DC-12V Sony media player in custom teak box & remote helmsman
2x B&W high end speakers with separate amplifier
AC-220V - airco 16.000 BTU


Front cabin:
A1-central berth  
Drawer under berth
Additional wardrobe instead of sofa
Safe laminated in hull
AC-220V airco 10.000 BTU

Aft cabin PS:
C1-large size (no bathroom)
Sea-berth cloth
Extra manual bilge pump
AC-220V airco 6.000 BTU (shared SB)

Aft cabin SB:
Custom, 1 berth & workbench/machineroom
Sea-berth cloth
AC-220V airco 6.000 BTU (shared PS)
DC-24V/AC-220V, 110 l/h desolator

Front bathroom:
AC-220V baby Nova 3 kg
Large bowl toilet

Aft bathroom:
Cloth hanger bar
Large bowl toilet


C1-large size galley
DC-24V Isotherm water cooled fridge & freezer
DC-24V Bosch Eno microwave
Force 10 gas stove with 3 jets & grill oven
DC-24V cut-off gas-valve near gas bottles
DC-24V 5 l. Quooker boiled water tap
DC-24V Nespresso coffee machine
Sweet & salt water manual foot pump

Electrical installations

Heating: DC-24V Eberspächer hydronic D10 – everywhere
Hot water: boiler 40 l. (engine, heating en AC-220V)
Sockets: DC-12V/AC-220V sockets – everywhere
Night Lights: DC-12V red LED – everywhere
Ventilators: DC-24V Bosch in each cabin & chart table

DC-24V & AC-220V (110V) Service Power System (Mastervolt)
Control panel:1x saloon, 1x master cabin
Batteries (service): 4x Lithium-Ion DC-24V / 160Ah / 4,3KWh
Current DC-24V: Mastershunt 500
DC-DC converters: several throughout installation
Lighting control: 20 light circuits, dimmed, all off, …
Alternator: DC-24V / 80A
Inverter/charger: AC-220V -> DC-24V -> AC-220V / 2.500VA / 60A
Charger: AC-220V -> DC-24V / 100A
Generator: Ultra whisper AC-220V / 6,0KVA / 1.500 RPM
Stray current protec.: Galvanic Isolator
Shore connection: AC-220V (110V) / 16A
Remote monitoring: GPRS module for SMS-alarms


DC-24V (12V) Instruments (Raymarine)

Ray218-E – chart table
RayMic 2nd – helmsman
AIS: RayAIS-50
Navtex: Furuno Nx-300 – chart table
SOLAS: Raylife-tags

Auto pilot:
RaySPX-30 processor
RayHydrolic linear drive
RayElectric linear drive (backup)
RayST-70 control panel - helmsman
RayWireless-remote control

ST-70+ display: 2x cockpit & 3x mast
ST-70 display: 1x chart table & 1x master cabin
Transducers: Ray-GPS, depth, speed & long arm wind
Plotter: RayE120-W – helmsman, RayKeyboard & monitor 19” – chart table
Radar: RayRD418-HD


Inmarsat terminal Thrane & Thrane - Sailor FB 250        7.500 Euro
Lots of spare parts (pumps, filters, anodes, …)               3.500 Euro
Diving compressor Bauer Oceanus-W                             2.750 Euro
Holmatro hydrolic ROD-cutter                                          2.500 Euro
“Corum” clocks for pressure, temperature & humidity      2.500 Euro
Zodiac dinghy & Yamaha 4BHP outboard                        1.500 Euro
Sailor 406 MHz Satellite EPIRB beacon                              750 Euro
RFD Lifraft 6 persons                                                           750 Euro
5x Musto inflatable life vest                                                  750 Euro
Gybe bloc                                                                             750 Euro
Jotron 9GHz GMDSS radar transponder                              500 Euro
Icom IC-M35 portable VHF                                                   250 Euro
4G to Wifi base station                                                          250 Euro
Drogue                                                                                  250 Euro
First aid kit                                                                             250 Euro
Emergency VHF antenna                                                      250 Euro
Total Options                                                                   25.000 Euro


Maintenance in Lagos by Soproma
Craning on shore: 18/01/2016
Launching into water: 20/05/2016
Cleaning hull en deck with sweet water
Check & small repairs all sails (North)
Brad new lazybag en sprayhood cover (North sails)
Waxing hull & cockpit, incl. UV protection
Cleaning mast, check standing & running rig
Grinding & 3 layers anti fouling (Awl Grip Gold)
New bearing, water-seal-gasket & engine connection for axle
New anodes – everywhere
Gori propeller full maintenance
Engine full maintenance
Generator full maintenance
Winches full maintenance
New toiletpumps (front & aft)
New deckvalves aft bathroom
New compressor for freezer
Total cost : 10.000 Euro






  • Length:
  • Beam:

Other specifications

  • Designer:
    Niels Jeppesen